Complex “SvetL” reload procedure (second generation)

Complex “SvetL” reload procedure (second generation) Before performing this “Procedure”, write on a separate sheet of paper all your current positions set on the Complex in Sections: "BODY SYSTEMS" and “DISEASE PREVENTION.|” You will need this later. Actions sequence In addition to the actions described in the User Instructions, Section 2 {using the “SvetL” Complex (p. 16–18)}, the following is required: 1. Launch the | “SvetL| Complex Correctly. 2. In the “LOAD CONTROL|” section disable the “SvetL|” Program (p. 52–53) in subsections “BODY SYSTEMS|” and “DISEASE PREVENTION” doing the following: a. Click on the picture of any previously selected organ. b . From the pop-up menu choose REMOVE ALL ORGANS AND DISEASES. c. Confirm by clicking YES. This will nullify (clear) the LOAD CONTROL. 3. Go back to the Main screen and exit the “SvetL” Program by clicking EXIT PROGRAM. 4. Turn the Complex OFF using the on/off slider on the back of the Complex. You do not need to disconnect the cable from the computer. 5. Wait at least 10 minutes.